HQR-250MS
MACHINE DESCRIPTION:
The HQR-250MS Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume throughput. It machines parts complete – from raw material to finished part – in a single setup.
MACHINE CHARACTERISTICS:
- Twin-turret/twin-spindle configuration for DONE IN ONE® processing
- Upper and lower 12-position drum turrets offer extreme efficiency
- Optional 16-position drum turret available
- High-speed and high-torque main and milling spindles
- High-speed rapid traverse rate for reduced non-cutting time
- Balanced cutting and simultaneous 1st and 2nd ops for fast cycle times
- Easily integrates with an optional bar feeder or robot loader/unloader
Caractéristiques de la machine
| Spécification | Bed Longueur - 850U mm | Bed Longueur - 1300U mm | |
|---|---|---|---|
| Capacité | Balançoire maximum | 370 mm / 14.60 in | 370 mm / 14.60 in |
| Diamètre d'usinage maximum | 344 mm / 13.500 in | 344 mm / 13.500 in | |
| Usinage Longueur maximale | 860 mm / 33.900 in | 1325 mm / 52.200 in | |
| Broche principale | Vitesse de pointe | 4000 rpm | 4000 rpm | Sortie moteur (30 Note minute) | 26 kw / 35.0 hp | 26 kw / 35.0 hp |
| Deuxième broche | Vitesse de pointe | 5000 rpm | 5000 rpm | Sortie moteur (30 Note minute) | 22 kw / 30.0 hp | 22 kw / 30.0 hp |
| Tourelle (Haute) | Nombre d'outils | 12 | 12 |
| Vitesse de pointe | 6000 rpm | 6000 rpm | |
| Sortie moteur (10 Note minute) | 5 kw / 7.5 hp | 5 kw / 7.5 hp | |
| Nourrir axes | Voyage (axe X) | 207 mm / 8.20 in | 207 mm / 8.20 in |
| Voyage (axe Z) | 760 mm / 29.87 in | 1225 mm / 48.25 in | |