The VTC-250D/50 Vertical Machining Center features a powerful 50 Taper High Torque spindle, full traveling column design and fixed table for machining of extremely long and heavy workpieces. Or with a table center partition the machine work envelop can be transformed into two separate work areas that allow the machine to be in cycle in one work area, while a part is being set up in the other work area. The machine also delivers fast rapid traverse rates to reduce non-cut times.
- Long fixed table design with split table capability
- 6,000 RPM, 50-taper High Torque spindle
- 1,181 ipm rapid traverse rate
- 24-tool storage capacity
- Maximum table load of 3,000 lbs.
|Capacity||Table Right/Left||2100 mm / 82.700 in|
|Table Longitudinal||635 mm / 25.000 in|
|Maximum Speed||6000 rpm|
|Motor Output (30 minute rating)||22 kw / 30.0 hp|
|Magazine||Number of Tools||24|
|Feed Axes||Travel (X Axis)||1760 mm / 69.30 in|
|Travel (Y Axis)||635 mm / 25.00 in|
|Travel (Z Axis)||660 mm / 25.60 in|