The INTEGREX i-800V/8 Multi-Tasking machine combines full 5-axis milling, powerful turning operations and pallet-changing capabilities to productively process large, highly complex parts such as jet engine components and spiral bevel ring gears.
Because the machine is able to perform milling, turning, boring and drilling operations in single setups, manufacturers can reduce the inaccuracies that occur when moving heavy parts across multiple workstations as well as eliminate work-in-process inventory.
Standard, high-speed and high-torque milling spindle specifications allow the machine to successfully meet a range of material requirements such as titanium, aluminum and steel.
The machine comes with a two-pallet changer that provides unattended operations and off-cycle part setup. This simple, efficient form of automation allows operators to load, unload and inspect parts on one pallet while the machine works on the other undisturbed.
- Wide range of available milling spindles address a variety of metalworking requirements
- Tilting B-axis allows for full 5-axis machining
- Compact milling spindle reduces workpiece interference
- Powerful turning spindle delivers heavy-duty performance
- Automatic tool changer offers continuous machining operations
- Two-pallet changer facilitates unattended machining
- Integrates with optional PALLETECH system for lights-out operations
|Specification||Bed Length -|
|Capacity||Maximum Machining Diameter||1500 mm / 59.060 in||Maximum Machining Length||1500 mm / 59.060 in|
|Turning Spindle||Chuck Size||1000 mm / 39 in|
|Maximum Speed||500 rpm|
|Milling Spindle||B-Axis Travel||150°|
|Maximum Speed||10000 rpm|
|Motor Output (40 ED Rating)||37 kw / 50 hp|
|Feed Axes||Travel (X Axis)||1700 mm / 66.93 in|
|Travel (Y Axis)||1500 mm / 59.06 in|
|Travel (Z Axis)||1150 mm / 45.28 in|