VORTEX i-630V/6
MACHINE DESCRIPTION:
The VORTEX i-630V/6 vertical machining center with a 24.80" pallet is perfect for job shops as well as aerospace and heavy construction part manufacturers focused on value, precision and high-volume production.
Equipped with a tilting spindle and rotary table for simultaneous 5-axis operations and multiple-surface machining, the machine productively cuts large complex parts, such as jet engine casings, airframe components and gearboxes, from titanium, aluminum and steel.
Standard, high-speed and high-torque spindle specifications are available to successfully meet a wide variety of application requirements.
The machine comes with a two-pallet changer that provides unattended operations and off-cycle part setup. This simple, efficient form of automation allows operators to load, unload and inspect parts on one pallet while the machine works on the other undisturbed.
MACHINE CHARACTERISTICS:
- Handles parts up to 41.34" in diameter and 39.37" high
- Tilting spindle design helps reduce setup times
- Spindle selection addresses various metal removal requirements
- Fast rapid traverse rate of 2,047 ipm
- Tool storage capacities from 43 to 160 tools offer high flexibility
- Two-pallet changer facilitates unattended machining
- Integrates with optional PALLETECH System for lights-out operations
Caractéristiques de la machine
| Spécification | Values | |
|---|---|---|
| Capacité | Diamètre maximum de la pièce | 1050 mm / 41.340 in |
| Pièce Hauteur maximale | 1000 mm / 39.370 in | |
| Broche | Taper broche | 50 |
| Vitesse de pointe | 10000 rpm | |
| Sortie moteur (30 Note minute) | 37 kw / 50.0 hp | |
| Magazine | Nombre d'outils | 43 |
| Rotary Axes | Spindle Tilt (B axis) | 150 degrees |
| Table Indexing (C axis) | 360.0000 degrees | |
| Nourrir axes | Voyage (axe X) | 1425 mm / 56.10 in |
| Voyage (axe Y) | 1050 mm / 41.34 in | |
| Voyage (axe Z) | 1050 mm / 41.34 in | |